Solved: Lennox iComfort Thermostat Error Codes 411, 225 and 31

May 18, 2022

When something’s wrong with your HVAC system, one of the first places to look is your thermostat. Most models use a digital display that will reveal a specific numerical error code. This error code can be used to help determine the problem and speed up the troubleshooting and repair process for HVAC systems like your furnace.

This is even easier with smart thermostats like the Lennox iComfort model. Let’s take a look at three serious error codes—411, 225 and 31—to find out what the problem is. We’ll also cover what steps your technician will take to repair the problem, and the possible costs to do so.

Solving Error Code 411

Error code 411 is an urgent priority to take care of. You’ll see this error code appear when the outdoor unit’s low-pressure switch malfunctions five times or more throughout one heating or cooling cycle. Since this error code involves the outdoor unit, it may be involved with your air conditioner. Each time the low-pressure switch opens incorrectly, the error count increases. Once it passes five strikes, the thermostat immediately shuts down the outdoor unit. This is called a lockout and is a safety feature designed to reduce damage.

Fixing the Problem

A technician will check the system charge using several methods, as the issue may be with the switch’s power connections instead of the low-pressure switch on its own. Once the cause has been uncovered, technicians will reset the outdoor unit by placing it in test mode or by resetting low-voltage power. Once the issue is taken care of, the error code should automatically disappear.

Estimated Repair Cost

Swapping out a low-pressure shutoff switch can depend on the specific model of your outdoor unit. You could expect to pay between $200 to more than $600 depending on parts and air conditioning repair costs. The shutoff switch itself runs an average of $30 to $150.

Clearing Error Code 225

Error code 225 is specific to your furnace, particularly the high-pressure switch. This switch is a safety component that releases high pressure inside the furnace, such as when airflow is blocked. When this error code appears, it means the pressure switch won’t close. Without steady airflow and pressure, the furnace won’t work as efficiently.

Fixing the Problem

The technician will monitor the high-pressure switch to see how it functions. They’ll measure the pressure while it [attempts|tries]50] to close during a heating cycle as well as its standard operating pressure. If they notice a problem, an obstruction blocking airflow is the most common culprit. There are several places to look, such as the vent and combustion air inducer. Technicians will check both these components as well as the condensate drain to locate the blockage.

Estimated Repair Cost

Because there are multiple places to inspect before an obstruction can be found, labor costs should be considered when fixing error code 225. Ultimately, the final cost of this furnace repair will depend on where the problem is located as well as how long it takes the technician to identify the source.

Resolving Error Code 31

Seeing error code 31 on your thermostat means it hasn’t been able to communicate with your furnace for more than three minutes. Multiple components communicate with the thermostat, so you can see this error code when any of them malfunction or fail. Most of the time this can be traced back to an electrical issue, like bad wiring or a loose connection.

Fixing the Problem

A technician can inspect all the connections and wiring of the communicating components of your furnace. They will test voltages and wiring ohms since particularly high resistance can lead to a disconnection. With a special tool called a multimeter, technicians can pinpoint where the disruption originated from. Sometimes this is the furnace’s float switch, a component that shuts down the furnace when the condensate drain pan is flooded.

Estimated Repair Cost

With multiple potential causes, it can be difficult to gauge the total repair costs of error code 31. Technicians will check the float switch to rule it out before systematically reviewing electrical wiring and connections. If the cause is damage or a failed component, replacement part costs should be included. You might expect to spend anywhere from $200 to more than $800 for higher-range models.